Hi Guys,
I have been doing some cleaning and o ring replacement on my carbs and needing a bit of clarification regarding the float height setting. The manual says it should be set between 12.5 and 13.5mm form the carb housing to the top of the float when held upside down. I don't know where...
Hi all,
Has anyone had a concern with tight tappets causing a cylinder misfire? The bike has done 60k, replaced one o/c ignition coil, carbs have been pulled apart and cleaned, diaphragms inspected etc, new plugs, fuel filter... still has a misfire, seems to go away at about 3500rpm....
Hi guys,
My 2001 FZ1 has developped a miss-fire, it began a couple of weeks back as an intermittent problem but has developed to a constant. I have changed the plugs, and checked the **Ω of the leads, ok. Started it up and hooked up a timing light on each lead and all seem to be firing. Any...
Hi all,
Sad day today, put my bike down.. fortunately it was low speed so only a bump and bruise to me, UNfortunately busted some bits on the bike mostly easy to replace EXCEPT the LH lower fairing... does anyone have one for sale? Gen 1 would be awesome if someone has a blue one!!! ;-)