Recent content by The_moo

Well I sold the bike and he put it up for sale and I bought it back... I guess ill update as I got again. I got a new main harness and im pulling it apart to paint it blue.

What color are the rear turn signal wires? I saw brown blue and brown green some where? Mine never had any and I am trying to track it down

Well we made a carb sync tool and synchronized them and it helped. We finally broke down and pulled them and found the float level off. I ordered a couple oem float sets to do it right. few changes to the bike

Well the coils didn't fix it. I am going to check for vacuum leaks this weekend. Not much will make 2 miss at the same time

Diaphragms and carbs were cleaned best I could but I didn't remove the bowls. I never put the advancer on . It is only "lean" on partial throttle... Carbs were jetted by PO. They looked like they were in great shape when I had them out and cleaned them. Never checked the bowls though I am...

put 500 miles or so. I am having issues with misfireing At partial throttle it cuts out. I cannot maintain 60-75 mph without it cutting out and I get misfires at partial throttle. If I hammer down on the throttle it snaps out eventually and goes back working. Also if I try to...

This is a rat bike, anything cheap or free is the style. I'll leave my money to the important stuff :)

Mine is chopped and harness was moved there No I didn't pull that sensor. I did pull oil but it was securely put back in and taped up

Looks like crap, I have so much left to do and so little money ! I am going to be painting the tank soon. I am read to get the seat done too.

Welded up a plate for EXup block off Bypassed the EXUP code Fixed the oil leak Dropped the pan and cleaned out the pickup tube and made a new oil leak on the pan Adjusted throttle cable Fixed the Tach Things to order Timing advancer 01 R1 shifter arm clutch and brake levers...

I verified the fuses were getting power I checked the ECU for corrosion last night I checked all plugs last night and they were all plugged in as far as I could tell Which plug is the ignition pickup coil? I think I know which one your talking about but I want to verify. I didn't start with a...

Impossible, twisted together then soldered and then heat srinked. Besides I left the plug on it so when we pulled the harness it was never distrubed

Plugged in Pulled the loom out and checked it and then put it back in and it works so I have a short some where

Come on guys if I fix the tach I can see the code it's throwing !

They are soldered together to complete the circuit and wrapped