Search results

The xr250 is a 4 stroke

I'm interested in the shifter. How much to ship to 23060

I have the Holeshot jet kit, with the shims set like raven rider jet kit.

I've been adjusting my fuel mix screws. They are currently set at 3 turns out. 3.5 seemed too rich. I kno I should have went to 3.25 first. So does my plug color look ok?

Threads are good, but a piece of sleeve is still welded to the inside of bars. Ordered new bars from part shark. Might try to grind sleeve fragment out and spot weld sleeve back in.

I purchased oem bar ends to replace scuffed ones. One would not tighten up all the way, and allowed the threaded sleeve to come out. Are the sleeves supposed to be welded in? Do I have to replace the bars?

I had the same problem with Meniere's disease / tinnitus. The doctor had me cut down my sodium intake. No more soda, chips, and salty foods. You can also replace table salt with sea salt when cooking. I have also increased my consumption of water too. Doing this will help keep the right amount...

Thank You.

So my awesome girl friend bought me a kuryakyn license plate mount helmet lock, for my birthday. License Plate Helmet Lock With Mount | Chrome | Küryakyn I know my Gen 1 has a lock. It is just hard to use with the passenger pegs and saddlebags attached. The first thing I did was see if...

Thank you.

That bike is Awesome!!

I have a Gen 1 with the following mods. Holeshot jet kit, Holeshot ais removal kit, Yoshimura slip on. After running with out the AIS system I have noticed more soot in the exhaust tip, when the remove the slip on silencer insert. The plugs look ok. I have been getting around 36 mpg. Should...

Suzuki DL-1000 V-Strom TFI Tuning Box

I bought that kit and did not use it. It has metal sleeves with a large ball bearing jammed in it. You put them in the ais port and hammer the ball further into the sleeve. I ended up using Dale's AIS kit. I liked his machined parts more. I replaced the vacume port cover on the 4th carb with one...

Thanks for your advice. I guess I'll keep some prestone 50/50 on hand.

I bought Dale's AIS removal kit. Is it possible to install this kit without removing the radiator? The coolant in it is fresh and I would hate to waste it. Could I just loosen the radiator? If I have to remove it, could you recommend a coolant that can be purchased from a auto parts store. That...

I bought four k&l carb rebuild kits for my 2001 fz1. Does anyone have experienc with these kits. The float bowl gaskets look different. I'm not too worried about those because they have already been replaced.i just wanted to replace the other orings, and float needles. The kit did not come with...

After working on my carbs last week, one of my lines started to leak. It was the coolant line between carb 1&2. Even with the clamp on it leaked. Replaced the hose with one from the hardware store. Check for leaks while it's running so the coolant is flowing. I would check the hose connecting...

I used to want ink when I was younger. Most of my friends seem to have it. I couldn't ever decide on something I wanted for the rest of my life. Here in Richmond Va , most of the VCU students are covered in ink.

I was about 10 miles form Mineral when it happened, working in the woods. It felt like a train was traveling beneath me. The trees were really shaking.