what would the cost be of changing sprokets...?
especially if you have to change the length of the chain??
would the rear be "easier" mechanically to change since there is a clearance issue with going bigger on the front..
thanks again guys.
Need advice....gonna be using the bike for some driving...need max milage.....
what set-up sproket can i go with to increase gas milage...07 model..
thanks, guys
anybody done such???
My o7 did the same thing...very pronounced, esp. in cold engine or cold weather, after break in, I switched to 5w-40 sythetic....problem immedietly improved by about 95%....Now just a hint on cold engine.
Lonerider, that is exactly what the mechanic at the dealership said.
1. clutch basket
2. warped plates
3. dry plates from where it sat and not run much before the purchase.
He said if it was no.3 , the lower viscosity oil would affect a change.
my 1st tip was that initial oil change...
updated 09.05.09.
did some research on clutch/viscosity issues,...
decided to try as a test for response, changed the oil once more to rotella-t 5w 40 synthetic.....after 5miles...different clutch.
problem solved.... was oil/viscosity issue... and the plates not getting"wet" enough.
thanks...
njfz1, the clutch lever freeplay was checked twice since new, adjusted once to spec....no difference in condition,...
njfz1......IT IS EXACTLY LIKE THE CLUTCH IS NOT DOING ITS JOB....AT OR BELOW 4K....
Please advise,
got an 07 fz1 bought new, now has1500 miles, after the 1st oil change at 250ish miles, i noticed the clutch not working like it should. I pull in clutch coming up to stop light,...whatever, and the engine is still pulling the rear tire???, this only happened after 1st oil...