Hey all, I'm in the process of swapping my forks for R1 forks; just got my stock forks off, and I was curious to see what the oil looked like, so I emptied them out. What's weird is, in one fork, I was only able to empty out 12 us oz, and in the other one, managed to empty almost 14 oz. I made...
REDUCED TO 150GBP
Grab yourself a bargin!!!!
For sale a full kit for your Yamaha FZ1 Gen2 06 to 10 years (may fit others) front forks, consisting of a pair of ATK 20 dampers, race tech fork springs and spacers.
The springs are 1.1 Kg (FRSP S3825110 part #) and the damper settings are shown...
For sale a full kit for your Yamaha FZ1 06 to 10 years (may fit others) front forks, consisting of a pair of ATK 20 dampers, race tech fork springs and spacers.
The springs are 1.1 Kg (FRSP S3825110 part #) and the damper settings are shown in the photos.
Spacers a re 107 mm long.
I am a pretty...
My 2008 FZ1 has just hit 30,000kms and I'm about to change the fork oil. What is the best weight oil to use? I'm 80kg dripping wet and like a "spirited" ride. 5w, 7.5w or 10w?
FIRST AND FOREMOST
I’m brutally honest, and I’m anal about my toys. These are take-offs of one of my personal machines (due to upgrade, not wrecked part-out). 100% functional and extremely clean. I’m on FZOA, 998CC, R1-FORUM, local PNW forums (GHETTO_D), & EBAY (GHETTO_CRUIZER). So, check my...
Hi guys
I've decided to buy some new front fork springs for my gen 2 fz1. 9.5kg to take my weight over the oem.
Is there any videos on changing the springs?
Is there any special tools needed like a spring compressor or can you do it without one?
Any do's or dont's ?
Any downloads or videos...
Hello guys
So I've done almost everything to my ride other than change the fork oil.
What I am wanting to know is...
For a FZ1-n 2006-
1. What weight oil is best to use ? 5 or 7.5
2. How much oil in each leg? 500+ml ?
3. The air gap? 140mm I think I read somewhere
4.is there any fork...
Hi All,
Can anyone with a 2013 model tell me what fork diameter you have?
Mine are 60mm Dia for most of the fork length (they do taper down at the top).
I have purchased a steering damper mount from ebay and the fork clamp is 50mm.
The ebay seller is claiming the 50mm bracket fits the...
:banghead:08 stock susp. Forks uneven at triple clamp
Bought FZ1S about 2 months ago w/ 5200 miles her. Yesterday after putting 1500 miles on her since purchase, I decided it's time to start tuning her ride. I pulled up on the mat in the garage, got her up on the center stand looked down...
Hi
Blew a front fork seal today , it's pouring out , question is , are they simple enough to do ? I did my Hayabusa ones some years ago ,are all USD forks much the same set up or am I better sending them off ? Also the front brakes started binding do I need a special tool to undo the caps to...
I am in need of a fork tube asap! for my 2001 fz1. The previous owner did not mention it was bent until I disassembled the fork to replace seals and sure enough it's bent far beyond repair.
Please let me know if you have a set of stock forks you may be willing to part with the tubes. I have...
So yesterday while I was swapping my tires out I decided to change my fork oil also. I mixed maxima 5wt and 7wt to make a 6 weight. I previously had just the factory fork oil in it. I gotta say the maxima oil made for a HUGE difference in ride quality. The bike rides way better than it ever has...
Anyone know of what other Yamaha models use the same callipers as the Gen 2 FZ1. Rebuild kits seem to be of similar price to used callipers, so going to scope some callipers out.
Im not interested in fork conversions as its a daily driver.
Winter has took its toll on the pistons and...