Dual straight from header to exhaust

2 headers 1 exhaust
 

Attachments

  • 8E0055C1-B992-4B03-AC51-B0226B58F57D.jpeg
    8E0055C1-B992-4B03-AC51-B0226B58F57D.jpeg
    239.2 KB · Views: 22
  • 72778398-72EA-4B77-9BC3-D1DE37297A6C.jpeg
    72778398-72EA-4B77-9BC3-D1DE37297A6C.jpeg
    106.9 KB · Views: 25
  • C9AB056B-EE9F-4EDA-8EB3-3F53F7F22194.jpeg
    C9AB056B-EE9F-4EDA-8EB3-3F53F7F22194.jpeg
    106.9 KB · Views: 24
  • 65B74949-B08D-4284-A185-7FD3F2A82CE8.jpeg
    65B74949-B08D-4284-A185-7FD3F2A82CE8.jpeg
    67.6 KB · Views: 25
  • DD354FA8-35CB-40CB-8972-D12C76EECEDF.jpeg
    DD354FA8-35CB-40CB-8972-D12C76EECEDF.jpeg
    75.3 KB · Views: 24
It's highly recommended, especially after exhaust mods...

I noticed your front end is lowered by quite a bit. Did you lower it yourself? Was the rear lowered as well?

In my opinion it is too low and should be raised up to make the bike more stable. I'd start with about 10mm of fork tube above the triple clamp...
 
It's highly recommended, especially after exhaust mods...

I noticed your front end is lowered by quite a bit. Did you lower it yourself? Was the rear lowered as well?

In my opinion it is too low and should be raised up to make the bike more stable. I'd start with about 10mm of fork tube above the triple clamp...
Yes I lowered it myself, I’m going to swap the rear shock with a 2018 R1 shock and order a lowering link for the rear shock this way I can lower the rear 2” to 4”
 
Back
Top