smurfturd
Member
Hey guys, I have an '06 FZ1 that I recently pulled apart to service the front suspension. No issues there but when putting the wheels and brakes back on I discovered that the caliper was actually binding/contacting the rotor. After looking into it I found that the RH leg where the axle passes through is not pulled all the way into the wheel bearings. It is just hanging out about 1/4" away. The axle doesn't have and boss or recess to pull that leg in so I'm really confused as to how this is supposed to be secure.
I ended up clamping the leg until it contacts the wheels spacers and torquing the pinch bolts but this seems like some redneck b.s. It is all good now but I feel like this can't be correct. Anyone else experienced this?
I ended up clamping the leg until it contacts the wheels spacers and torquing the pinch bolts but this seems like some redneck b.s. It is all good now but I feel like this can't be correct. Anyone else experienced this?