gen 1 throttle cable question

jayareuu

New Member
Was wondering if the throttle cable all the way to the right of the handlebars is a push or a pull cable? Mine has frayed bad and it just gets stuck in the throttle on position when opening up so i need to replace it and couldnt find any info in the manual i got online. I found a motion pro pull cable but im not sure if its the right one yet. tia
-J
 

Attachments

  • 20210815_120522.jpg
    20210815_120522.jpg
    1.5 MB · Views: 11
my answer is kind of late but I attached the diagram. I'm pretty sure that is the pull cable. I would recommend that you buy both the pull and return cables because you have to remove the carbs about half way out the left side to replace the cable(s), and the parts are relatively cheap ($25-$40 each cable). Also when you do the job tie a piece of string or wire to the throttle end so you can thread the new cable back the correct routing
 

Attachments

  • MjE3ODc1Ng-573c4b72.png
    MjE3ODc1Ng-573c4b72.png
    47.2 KB · Views: 3
Back
Top