Satans666 bracket

Get a 2015 R1 Shock and 04 / 06 R1 Dog Bone Linkage, Put regulator on upper side of its mounting plate, a little bit of work but nothing most people can do. Exup servo eliminator needed.
 
The 2015 R1 Shock is adjustable for ride height ( Length ) and is 315mm long but the standard FZ1 Shock is 320mm Long, so the R1 shock is 5mm short. to make up the difference the R1 shock is just about on its limit for ride height adjustment. By using the 04/06 R1 dog bone linkage which will lift the rear of the FZ1 about 30mm then adjust back down so the rear of the FZ1 is approx 15 to 20mm higher at the back end to make the bike stear nice and quick.
 
The 2015 R1 Shock is adjustable for ride height ( Length ) and is 315mm long but the standard FZ1 Shock is 320mm Long, so the R1 shock is 5mm short. to make up the difference the R1 shock is just about on its limit for ride height adjustment. By using the 04/06 R1 dog bone linkage which will lift the rear of the FZ1 about 30mm then adjust back down so the rear of the FZ1 is approx 15 to 20mm higher at the back end to make the bike stear nice and quick.
Thank you!
So the dog bone and the triangle is what I should get?
 
Back
Top