FZ1inTX
Adminstrator
I ordered from SAVE 30% ON ALL YAMAHA PARTS !!! the 2005 GEN I front sprocket and a new washer. Gen I part number 4XV-17460-00-00. I wanted to keep the rubber intact so I kept it OEM. The two parts was just under $30 with shipping. Could have got it cheaper with some aftermarket stuff but....
I'll figure out the speedo error using the GPS at 40, 60 and 75, the three speeds around here that will get you in trouble. I plan on using the GoPro HD to record in the same shot the GPS and the panel and make sustained speed runs of about 1 - 2 miles per. Then, I'll come back and watch the video, note the differences and use the label maker at work with 1/4" tape to write them to place inconspicuously on the dash someplace.
One more mod about to be checked off!
I'll figure out the speedo error using the GPS at 40, 60 and 75, the three speeds around here that will get you in trouble. I plan on using the GoPro HD to record in the same shot the GPS and the panel and make sustained speed runs of about 1 - 2 miles per. Then, I'll come back and watch the video, note the differences and use the label maker at work with 1/4" tape to write them to place inconspicuously on the dash someplace.
One more mod about to be checked off!
Last edited: