DenArnold
Wizard
Topic started in Pay-It-Forward Goodwill 'FREEBEES'
I've been a while tinkering to create someting similar to what eg the GS1200 and the MS have as rear fender/mudguard. I too have a integrated LED taillight with indicators, but since the Belgian weather has been rather wet, I have to date kept the stock rear end...
I've tried if the BMW or GS rearwheel mudgard would possibly fit with some minor modications, but the issue with the GS type it's original designed to fit on a cardan rearend and the MS type is designed to fit on the side where the rearsprocket is And the arms are too short...
Some idea's:
1. create a mold in wood and use epoxy
2. ply one in Aluminium?
Switched out to tail tidy with rear brakelight intigrated blinkers so if you need the stock setup just pay the shipping and its yours.
You may regret getting rid of it,I am putting mine back on,if you ride a all in the rain/after rain on road works etc you get mud,road grime etc over your tail light,back seat,luggage etc.
I've been a while tinkering to create someting similar to what eg the GS1200 and the MS have as rear fender/mudguard. I too have a integrated LED taillight with indicators, but since the Belgian weather has been rather wet, I have to date kept the stock rear end...
I've tried if the BMW or GS rearwheel mudgard would possibly fit with some minor modications, but the issue with the GS type it's original designed to fit on a cardan rearend and the MS type is designed to fit on the side where the rearsprocket is And the arms are too short...
Some idea's:
1. create a mold in wood and use epoxy
2. ply one in Aluminium?
Last edited: