Mine runs fine on all the 87 (or whatever regular gas is) that I have put in it.
Can't tell any difference.
Can't tell any difference.
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Help please 2001 yamaha FZS1000N
Melholcik
Member
I’ve got kinda a helpful note for anyone who cares, but a little back story
I’m getting ready to seal my tank, like a dumbass I forgot to pull the fuel sender out before I put some good rust removing acid in the tank (rookie mistake) by the time I realized the tank was clean and the fuel sender was garbage, so I went looking, and most places it’s about 160$ for a used one and I couldn’t find any fz1 specific after market ones, and no new ones, but I was able to get the part number, the part number partzilla has is the same as the Yamaha grizzly 600 fuel level sender, which there was one on Amazon for 20 dollars and I figured at that price it was hard to go wrong. I ordered it and it turns out the actual potentiometer is the same between the two fuel senders, only the fuel float and arm are different, so as long as your float and arm are in okay condition, you can just swap them into the new potentiometer.
Here is the link for the part I bought:
https://www.amazon.ca/gp/aw/d/B0BLVTBKH7?psc=1&ref=ppx_pop_mob_b_asin_title
I’m getting ready to seal my tank, like a dumbass I forgot to pull the fuel sender out before I put some good rust removing acid in the tank (rookie mistake) by the time I realized the tank was clean and the fuel sender was garbage, so I went looking, and most places it’s about 160$ for a used one and I couldn’t find any fz1 specific after market ones, and no new ones, but I was able to get the part number, the part number partzilla has is the same as the Yamaha grizzly 600 fuel level sender, which there was one on Amazon for 20 dollars and I figured at that price it was hard to go wrong. I ordered it and it turns out the actual potentiometer is the same between the two fuel senders, only the fuel float and arm are different, so as long as your float and arm are in okay condition, you can just swap them into the new potentiometer.
Here is the link for the part I bought:
https://www.amazon.ca/gp/aw/d/B0BLVTBKH7?psc=1&ref=ppx_pop_mob_b_asin_title