evz
Member
Hi guys was lubing throttle cables as part of normal maintenance after putting things back together the throttle felt stiffer than it did before also also a little sticky.
After taking it apart numerous times I noticed this washer on the inner edge of the throttle tube near the cam, you can see it in this image https://i.ebayimg.com/images/g/4ekAAOSwxDNZhMoO/s-l500.jpg
Does anyone know if this is suppose to so on the inside of the aluminum cable housing or the outside? It felt stiff either way but I didn't have time to mess with it and can't see anything in the manual on its positioning.
Thanks
After taking it apart numerous times I noticed this washer on the inner edge of the throttle tube near the cam, you can see it in this image https://i.ebayimg.com/images/g/4ekAAOSwxDNZhMoO/s-l500.jpg
Does anyone know if this is suppose to so on the inside of the aluminum cable housing or the outside? It felt stiff either way but I didn't have time to mess with it and can't see anything in the manual on its positioning.
Thanks
Last edited: