REDUCED TO 150GBP
Grab yourself a bargin!!!!
For sale a full kit for your Yamaha FZ1 Gen2 06 to 10 years (may fit others) front forks, consisting of a pair of ATK 20 dampers, race tech fork springs and spacers.
The springs are 1.1 Kg (FRSP S3825110 part #) and the damper settings are shown...
For sale a full kit for your Yamaha FZ1 06 to 10 years (may fit others) front forks, consisting of a pair of ATK 20 dampers, race tech fork springs and spacers.
The springs are 1.1 Kg (FRSP S3825110 part #) and the damper settings are shown in the photos.
Spacers a re 107 mm long.
I am a pretty...
Hi all,
First time poster, short term lurker.. Bought a 2008 FZ1S a short while ago and decided to build a scrambler/enduro type thing with it (not asking for opinions!)...
Selling most of the front end parts, will remove them when/if sold. List as below, collection from Byfleet KT14, Box Hill...
Morning Team! Just a 2008 FZ1 last week and took it for a 3 day to Brecon in Wales. It’s a completely standard bike apart from an Akra end can and crash bungs. I’m looking at upgrading the suspension first, what would everyone recommend?
Wishing all forummembers and their families A Verry Merry Christmas and a Great end 2017 and a magnificent start of 2018
:needpics:
Challenge to post a Xmas/New year festivity picture with your friends/family...
Hello,
I am looking for a front end for my 2014 FZ1. I need forks, triple clamps and a front wheel. Let me know if you have anything available? I am located in California
I recently restored the valve to full function. Glad I did. I bought it used in 09 with an after market muffler that was too dam loud. E bayed a factory unit along with cables. Amazing how much low end power I restored. Bike has 46k on it now (as in 46,000 plus miles).
Wanted to get this...
WTB Gen 2 handlebars and end weights FOUND!!!
Looking for a nice set of oem gen 2 handlebars with end weights in great condition.
FOUND A SET!! Thank you
Kevin
I am in Washington State
Overheating??
EDIT: Thermowax issue hopefully solved, now need help with overheating. Check last post below for info.
Okay guys well my FZ was not wanting to start very easy when cold, it would take a tiny bit of throttle to start up and idle would stay around 1200 then it would be...
Extreme Long Term Test
Well the end has finally come for my Frank Thomas Street Boots with the soles delaminating.
This is no surprise when you take into account that the top songs on the charts the year of purchase were “Maneater” by Hall & Oates and “Down Under” by Men At Work along with...
I am upgrade my FZ8 to a Fazer euro front end so I will no longer need this setup.
This is for 100% needed plug and play.
This will include the gauge mounts, all the plastics and trims. the headlight, the bulbs / wiring harness for the retrofit, and a PUIG smoked windscreen. The neon yellow...
Just purchased my fz1 and had an unfortunate collision with a deer. i came out ok but It took out the front end of my bike. Im hoping that someone has an extra set in the garage to sell. Myles
Everything will be a direct swap back and forth, I'd appreciate a little money on your end since i have a retrofitted headlight.
I am located in CT, and willing to do all the actual work/wiring if you come to me.
-B
My current headlight
hello , getting the miles covered on my fz1n now , and shes superb . now i seen several change there fz1 fazers to naked , but i wanna go the other way . i see on ebay that i can get an abs plastic cowling from china , and headlights and bracket from several sources too , has any done this...
I was planning to fit a KAOKO cruise control thingy to my bike this weekend but it didn't go as planned. It seems that for some reason my bike doesn't have what are supposed to be standard bar end or fixtures. The KAOKO and the parts diagrams all indicate it should have some large diameter...
Greetings from Victoria Australia.
Just picked up a 2009 FZ1N.
Has a few bits on it already, Vance and Hines slip on, Renthal bars (not sure I like them though), Short levers, and bar end mirrors.
Needs a couple of tires, service and a good clean as its been in storage for a little bit...
Hi guys just a question on the bar ends. Ok I have standard bars on the bike (2006 FZ1n) with R&G weighted bar ends, there's a 4mm hex bolt that holds them on. On removing the bar end there's the m6 bolt hole in the end of the bar that holds the bar end weight.
My question is, can I remove...