SKM348
Member
Everything went smooth for my first oil change. Went w/Mob-1 10-40W 4T and Walmart supertech 7317. I have the lower fairing so I had to remove a few bolts to get at the filter and 17mm drain plug. Couldn't tell if crush washer was good or bad so left it on there. Used the new 'plier type' filter wrench and it worked well. Tipped the bike over as low as I could hold it to get the last drops out and filled back up w/about 3.6 qrts. Kinda tricky getting the filter back on tight, had to lay down to get a good angle w/my right hand and snugged it up pretty tight with no drips or leaks. Bike runs great. Previous owner had used nothing but Yamalube but I wanted to switch to M1. It shifts great as well. This is a nice bike!