Hi all
Can anyone enlighten me on the bung that falls out with ref to clutch? Any pics would be great and is gen 2 related or only relevant to gen 1
Many thanks Dale
Hi guys
Couple of questions if you will on gen 2 clutch basket
First I've pulled the clutch apart as its very noisy (I have replacement on the way ) and noticed lack of oil on the plates in general, I did hear of a mod involving drilling extra holes in the basket to allow more oil through...
Hi guys
As title , the buttons on the dash have been intermittent for some time now , but just recently have stopped working altogether, it started with the reset one not working now the other one has frozen out . Any one had this or knows of a fix ?
Good evening
Hope you all had a good Christmas!! .. does anyone else experience uneven rear brake pad wear , I keep having to replace the pads every couple of years as the outer one wear out (piston side ) although the inner one is still like new !! Last time I replaced them I changed the...
Morning all
Not been on here for sometime , I found it impossible to find the site, so much so I thought it had gone, anyway I've recreated my account and finally I'm back , there will be hours of reading to catch up now
Morning
I've noticed the chain has become very noisy/whiny over the last few months , it was replaced about 10k ago. Every thing seems ok wear wise , I'm wondering if it's worth trying an oe front sprocket on it with the damper to so if this helps any thoughts , experiences?
Cheers
Hi guys
Is it normal to have a bit of play in the rear dog bone?
I've just replaced the bearings etc as they were quite badly worn but there is still a small amount of play
Hi guys
Can someone tell me where the earthing point is from the wiring harness on a gen 2 please, I've got the main one on top of the crank case , surely there is another that earths the harness only it I can't see it ,
Regards Dale
Hi guys
Came back from an 80 mile run, bike running perfect , stopped for 20 mins then started up and she was only running on three cylinders .. limped home and left it till the following day ,started her up and running as normal then cut out and won't restart, now the cooling fan runs at low...
Good day
Been running the stock can for the last 18 months or so with the exup valve wired open ,(gen 2 ) today I decided to put the cables back on , but found the servo motor no longer cycles , I'm guessing the motors seized although I've not done any other checks as yet ,, bike runs well ...
Hi
Any one find their drive chain noisey ?
Just replaced mine with sprockets and I think it seems to whine more than before ,, only explanation I can think of would be due to the amount of crud I removed from inside the front casing acting as a sound barrier..
Any other noisey chains out...
Hi
Over the last year I've noticed the bike cranks a long time before starting when hot , when cold it's on the button, two things come to mind , possibly the pc map being on the rich side at low rpm or maybe valves are on the tight side ?50k and not touched to my knowledge, ,,, or of course...
Put the stock can back on a few days ago (like I do occasionally )and I'm convinced it runs smoother and much nicer than with my slip on albeit quieter ...
Any thoughts?
Well I took the plugs out today for a clean etc and they looked as clean as the day they were fitted , no carbon/ soot ..
I'm hoping this is a good sign
Bit of a strange one
Took the bike to work one day last week & ran as normal ,when I came to leave,as I pull away I get a hiccup. Still cold I figure so carry on,but every time I accelerate from closed throttle it miss fires on one cylinder, it was low on fuel so filled up at next stn,but made...
Hi
Blew a front fork seal today , it's pouring out , question is , are they simple enough to do ? I did my Hayabusa ones some years ago ,are all USD forks much the same set up or am I better sending them off ? Also the front brakes started binding do I need a special tool to undo the caps to...
Hi guys
Took my gen 2 for annual inspection today and the guy advised that the outer rear pad was low even though the inner is as new ,, now I replaced these 3.500 miles ago , even if I were heavy on the rear what I can't understand is why the outer one wears so much more ,come to think of it...
Hi
Has anyone mounted a gopro under side of front fairing on a gen 2 . It looks like it could be a bit tight tight under heavy braking , thought I'd ask before wrecking the muddy or gopro
hi
anyone help ? my mobile wont load the site , been down for weeks now ,, happened some time ago and was rectified , same thing happening just get a blank white screen
thanks